|
Product
code
|
Part
|
Part number
|
Description
|
MFR
|
|
1000478498
|
POSITIONER
|
MH-700
|
POSITIONER;
CONNECTION: NPT 1/4 IN; GAUGE CONNECTION PT (NPT) 1/8 IN, APPLICATION: RO
WATER COOLING, TYPE: PNEUMATIC; SINGLE ACTING, STANDARD: PROTECTION IP66;
PN:MH-700, MFR: MOTOYAMA; S/N:10311845, INPUT SIGNAL ; 4 -20 MA DC, AMBIENT
TEMPERATIRE : -20 TO 60 DEG.C; SUPPLY PRESSURE 0.14 TO 0.7 MPA (1.4 - 7 BAR)
|
MOTOYAMA
|
|
1000478475
|
VALVE
|
AO-3507
|
VALVE,
CONTROL; APPLICATION: RO WATER COOLING, TYPE: TCV-0321A, VALVE SIZE: BODY 8
IN, BODY MATERIAL: A216WCB, MEDIA FOR WHICH DESIGNED: WATER, OPERATING
PRESSURE: SPRING RANGE:1-3 KGF/CM2; SUPPLY 4 KGF/CM2, TRIM: SUS316; MFR:
MOTOYAMA; MODEL:AO-3507, S/N:12B609K, ACTION: RA PORT: C-B; RATING : ANSI 150
# RF; SIZE: 8 IN X 8 IN; CV: 675 GPM (100 MM); GASKET P2600
|
MOTOYAMA
|
|
1000472199
|
TOUCHSCREEN
|
TFT-17-OF1-RU
|
TOUCHSCREEN,
DATA ENTRY; DIMENSIONS: 17 IN, MOUNTING FACILITY: OPEN FRAME WITH POWER CABLE
AND POWER ADAPTER;; PN:TFT-17-OF1-RU, MFR: TFT; S/N:BA003109
|
TFT
|
|
1000470065
|
VALVE
|
VC21
|
VALVE,
SOLENOID; CONNECTION TYPE: PORT IN PT1/4, 3/8 AND OUT PT1/4, 3/8, OPERATED:
HYDRAULIC, MEDIUM: OIL, DESIGN RATING: 250 BAR, COIL: DIN CONNECTOR,
POTENTIAL: 24 VDC, APPLICATION: AGV HYDRAULIC SYSTEM; PN:VC21, MFR: HYDRO-TEK
CO., LTD
|
HYDRO-TEK CO.
|
|
1000245436
|
SENSOR
|
MRDS-E130604
|
SENSOR;
TYPE: PROXIMITY, RANGE: 8 MM, POTENTIAL: 12-24 VDC, CURRENT: 10 MA;
PN:PR18-8DP, MFR: AUTONICS, PN:MRDS-E130604; MER_ID:RM-M02-0119
|
AUTONICS
|
|
1000441661
|
MODULE
|
TBA-K022
|
MODULE;
TYPE: CPU, BMS SET (MASTER X350 ) CAN COMMUNCATION (NODE ID 0X:351;NODE ID
0X:352 ;NODE ID 0X:354 ;NODE ID 0X:355) ; INCLUDING CONNECTION CABLE, POWER
SUPPLY: OPERATNG : 24 V, APPLICATION: FOR AGV, DIMENSIONS: W X LX H : 140 X
70 X 10; ,SUPPL: PROPOWER; MODEL:TBA-K021, S/N:1704T0005, INCLUDES:MODULE;
TYPE: INTERFACE, BMS SET (SLAVE) QTY 3 ; INCLUDING CONNECTION CABLE, POWER
SUPPLY: OPERATNG : 60 V, APPLICATION: FOR AGV, DIMENSIONS: W X LX H : 140 X
70 X 10; ,SUPPL: PROPOWER; MODEL:TBA-K022, S/N:1704T0005-1(8S)THE BMS (
BATTERY MANAGEMENT SYSTEM ) IS A SET OF 1 MASTER MODULE AND 3 SLAVE MODULES
PARAMETER CONFIGURATION /CAN COMMUNICATION SETTING AS PER MAADEN DATASHEET
|
MODULE
|
|
1000465402
|
MODULE
|
RM300HA-24F
|
MODULE;
TYPE: FAST RECOVERY DIODE, APPLICATION: AGV; PN:RM300HA-24F, MFR: MITSUBISHI
ELECTRIC CORPORATION; DC CURRENT : 300 A; REPETITIVE PEAK REVERSE VOLTAGE
1200 V
|
MITSUBISHI ELECTRIC CORPORATION
|
|
1000465404
|
MODULE
|
MDO 500-22N1
|
MODULE;
TYPE: HIGH POWER DIODE, APPLICATION: AGV; PN:MDO 500-22N1, MFR: IXYS; IFRMS =
880 A, IFAVM = 560 A, VRRM = 1200-2200
|
IXYS
|
|
1000019658
|
MONITOR
|
VE248
|
MONITOR,
VIDEO; TYPE: LCD, SIZE: 23.6 IN, POWER SUPPLY: 130-240; 50/60HZ; 1A V;
PN:VE248, MFR: ASUS; REF:VE248H, S/N:DALMQS058956 T, DRAWING: M4484SE REV:0
|
ASUS
|
|
1000308156
|
SENSOR
|
AS80-50DP3
|
SENSOR;
RANGE: 50 MM, POTENTIAL: 12-48 VDC; PN:AS80-50DP3, OEM: AUTONICS; 80 SQUARE
(AS SERIES)
|
SENSOR
|
|
1000024528
|
SPRAYER
|
3130
|
SPRAYER;
TYPE: ELECTRICAL CONTACT CLEANER; FREEZE, DIMENSIONS: WD 2.63 X HT 7-3/4 IN,
VOLUME CAPACITY: 16 OZ; PN:02983021, MFR: MSC INDUSTRIES, PN:03130, MFR: CRC;
MER_ID:CRM_1063, CERTIFICATION - NSF K2, BRAND: MSC, CONTAINER: CAN
|
CRC
|
|
1000026026
|
VALVE
|
40911
|
VALVE,
SOLENOID; TYPE: PRESSURE REGULATOR, VALVE SIZE: DN 25, CONNECTION TYPE: RP
INTERNAL THREAD, MEDIUM: GAS, DESIGN RATING: 500 MIL BA, POTENTIAL: 230 VAC,
POWER: 25 W, APPLICATION: CRU ROTARY DROSS FURNACE; PN:VAD 125R/NW-25A, MFR:
KROMSCHRODER; PN:40911-0001-16; EQ MODEL:40911, MFR:MECHATHERM, START
|
MECHATHERM
|
|
1000478031
|
ASSEMBLY
|
E51PLT1
|
ASSEMBLY;
TYPE: SENSOR, SHIELDED, APPLICATION: CRU DELAQQ KILN DISCHARGE AIRLOCK,
DIMENSIONS: 4.5 X 1.54 X 1.78 IN; PN:E51PLT1, MFR: CUTLER HAMMERMFR: EATON;
INDUCTIVE PROXIMITY, RANGE: 13 MM;10-30 VDC
|
EATON
|
|
1000478133
|
SENSOR
|
E51SPL
|
SENSOR;
APPLICATION: CRU DELAC KILN DISCHARGE AIRLOCK, TYPE: SENSOR BODY, POTENTIAL:
10-30 VDC, CURRENT: 600 MIL A, ELECTRICAL CONNECTION: 4 WIRE, DIMENSIONS:
3.14 X 1.54 X 1.73 IN; PN:E51SPL, MFR: CUTLER HAMMERMFR: EATON
|
EATON
|
|
1000478135
|
SENSOR
|
E51RN
|
SENSOR;
APPLICATION: CRU DELAC KILN DISCHARGE AIRLOCK, TYPE: SENSOR RECEPTACLE,
POTENTIAL: 10-30 VDC, CURRENT: 600 MIL A, ELECTRICAL CONNECTION: 4 WIRE,
DIMENSIONS: 3.14 X 1.54 X 1.73 IN; PN:E51RN, MFR: CUTLER HAMMER; OEM: EATON
|
CUTLER HAMMER
|
|
1000477714
|
SWITCH
|
OPTISWITCH
|
SWITCH,
LEVEL; POTENTIAL: 12...30 V, CURRENT: 0.0035 A, METHOD OF ACTUATION:
CAPACITIVE, ACTION: PNP, APPLICATION: PAN LEVEL MONITORING; PN:6600 C, MFR:
KROHNE; MODEL:OPTISWITCH, USED FOR RM FINISHING CCL WAXER PAN LEVEL
MONITORING (AVS)
|
KROHNE
|
|
1000369975
|
SWITCH
|
E51DT1
|
SWITCH,
PROXIMITY; TYPE: INDUCTIVE; SHIELDED TOP TARGET SENSING HEAD, SENSING RANGE:
0.51 IN, POTENTIAL: 24 VDC, ACTION: NPN/PNP, CONTACT ARRANGEMENT: 1NO-1NC,
CONNECTION TYPE: NPT; 4 WIRE, DIMENSIONS: L 1.38 X W 1.51 X H 1.51 IN,
APPLICATION: CRU DELAC AIRLOCK, STANDARD: UL; CSA; PN:E51DT1, MFR: CUTLER
HAMMERMFR: EATON; DRAWING: MD-451-5240-EG-EL-DSD-62015, DRAWING:
MD-451-5240-EG-EL-DSD-62016
|
EATON
|
|
1000308367
|
VALVE
|
2PV250E-15
|
VALVE,
SOLENOID; CONNECTION TYPE: 1/2 PT, ELECTRICAL CONNECTION: M12, POWER: 24 VDC,
TEMPERATURE RATING: -5-+55 DEG C; PN:2PV250E-15, MFR: AIRTAC; TWO POSITION
TWO PORT, PROTECTION CATEGORY: IP65, SIGNAL TYPE: DO
|
AIRTAC
|
|
1000315869
|
STATION
|
40.004306
|
STATION;
APPLICATION: DATA ACQUISITION, SPECIAL FEATURES: LICENSE NO IBAPDA - V6-2048;
DONGLE NO V201222, SPECIFICATION: IBARACKLINE SAS, XEON E3, WIN7 64BIT, PCI
E; PN:40.004306, OEM: IBA
|
STATION
|
|
1000464241
|
CONVERTER
|
SD-15B-05
|
CONVERTER;
TYPE: SD-15 SERIES; DC-DC, OUTPUT: SINGLE, POTENTIAL: 5 VDC, CURRENT: 3 A,
POWER: 15 W; PN:SD-15B-05, MFR: MEAN WELL
|
MEAN WELL
|
|
1000163486
|
WRENCH
|
WRENCH
|
WRENCH,
TORQUE; TORQUE RANGE: 3-20 NM; MER_ID:RM-L05-1358
|
WRENCH
|
|
1000370827
|
KIT
|
P200/SSPPP/VT/VT/SVT/504
|
KIT,
PUMP REPAIR; TYPE: DIAPHRAM, COMPRISING: PRIMARY WEAR PARTS, APPLICATION: FOR
EMULSION SYSTEM VACCUM FILTER SKIMMER; MODEL:P200/SSPPP/VT/VT/SVT/504
|
KIT
|
|
1000026032
|
HOSE
|
40911
MECHATHERM
|
HOSE,
FLEXIBLE METAL; TYPE: BRAIDED; PN:40911-0001-22; EQ MODEL:40911 MECHATHERM,
MER_ID:RM-C02-0022
|
HOSE
|
|
1000381270
|
INDICATOR
|
MP-9405W
|
INDICATOR;
TYPE: WEIGHING, RANGE: ACCURACY:0.02 %, POWER SUPPLY: 230 VAC, SPECIFICATION:
OUTPUT: PC-RS232, REMOTE DISPLAY-CURRENT LOOP; PN:MP-9405W, MFR: MAPO SCALE
CO; RM FIN TRUCK WEIGH SCALE
|
MAPO SCALE CO
|
|
1000361862
|
SEAL
|
466292
|
SEAL,
RING; MATERIAL: SIC, APPLICATION: SIDE CHANNEL PUMP SC 5061; PN:00466292,
OEM: DICKOW PUMPEN; TAG:475, S/N:PB12198486, DRAWING: 04.30.542
|
SEAL
|
|
1000304631
|
SHAFT
|
990664 0001 SM
|
SHAFT;
TYPE: UNIVERSAL JOINT; PN:990664 0001 SM, OEM: EISENMAN; ART:F000156057, WITH
FLANGE
|
SHAFT
|
|
1000475710
|
VALVE
|
VALVE
|
VALVE,
CHECK; TYPE: INSERT DISK, VALVE SIZE: 8 IN, APPLICATION: 108 A/B LOBE
BLOWERS; TYPICAL DIMENSIONS: A - 5 5/8 , B - 1 1/8 X C-11 INCHES
|
VALVE
|
|
1000272585
|
ELECTRONIC COMPONENT
|
M550D THOR B2
|
ELECTRONIC
COMPONENT, REMOTE CONTROL SYSTEM; APPLICATION: BACKUP ROLL DE-CHOKER MACHINE,
POTENTIAL: 3.6 V; PN:M550D THOR B2, OEM: IMET; S/N:3056-2034 1872
|
ELECTRONIC
COMPONENT
|
|
1000272589
|
ELECTRONIC COMPONENT
|
M550S
THOR B2
|
ELECTRONIC
COMPONENT, REMOTE CONTROL SYSTEM; APPLICATION: TCM-DECHOKER; PN:M550S THOR
B2, OEM: IMET; S/N:3062-20455729
|
ELECTRONIC
COMPONENT
|
|
1000015166
|
WHEEL
|
PS-7000-FL AGVS
|
WHEEL;
TYPE: LOAD, MATERIAL: URETHANE, OUTSIDE DIAMETER: 550 MM, WIDTH: 250 MM;
PN:LW500-250, MFR: AGVS; EQ MODEL:PS-7000-FL AGVS, MER_ID:RM-M01-0054, F/AGV
SPOOL HANDLING
|
AGVS
|
|
1000313214
|
SENSOR
|
SENSOR
|
SENSOR,
TEMPERATURE; STYLE DESIGNATOR: RTD; MFR: PYROMATION; OD: 0.25";
MATERIAL: 316 SS;NIPPLE SIZE: 1/2" NPT; DIMENSION ''N'': 4";CONDUIT
CONN: 3/4"DUPLEX SENSOR, FOR DESULFURIZATION
|
PYROMATION
|
|
1000300098
|
CONTROLLER
|
901207
|
CONTROLLER;
TYPE: OXYGEN ANALYZER; PN:901207, OEM: TENOVA; WITH DIGITAL AND ANALOG
OUTPUT; ORDER NO. 340.0061K
|
CONTROLLER
|
|
1000369935
|
ROLLER
|
ROLLER
|
ROLLER;
APPLICATION: ROTARY DELACQUERING KILN, TYPE: SUPPORT, DIMENSIONS: DIA 650 X
LG 305 MM; DRAWING: MD-5240-EG-ME-GEA-61808; ASSEMBLY
|
ROLLER
|
|
1000307701
|
COUPLING
|
COUPLING
|
COUPLING;
APPLICATION: NEW VORTEX PUMP, TYPE: SLEEVE; DRAWING: DWG A-182402-AT, POS:2
JBM, INC
|
COUPLING
|
|
1000032268
|
PROCESSOR
|
DSP2-1A
|
PROCESSOR;
TYPE: DIGITAL SIGNAL; PN:DS.DSP2.801.4, MFR: KELK, MFR: ROLLMAX;
MODEL:DSP2-1A, MER_ID:RM-L04-1675, WITHOUT WIRING HARNESS
|
ROLLMAX
|
|
1000428677
|
PAN
|
JET-001
|
PAN;
TYPE: DROSS PAN 3 CAVITY CAST STEEL EA, DIMENSIONS: 3086X1200X915 AS PER
DRAWING DN:JET-001 MM, MATERIAL: CAST STEEL ZG270-500, SPECIFICATION: CAST
STEEL; PN:JET-001, SUPPL: Jet Technology Arabia
|
PAN
|
|
1000369933
|
PLATE
|
PLATE
|
PLATE,
MOUNTING; APPLICATION: CYLINDER; DRAWING: MD-451-5240-EG-ME-GEA-61620, POS:7;
WITH PIN; FOR DELACQUERING SYSTEM EMERGENCY VENT DAMPER
|
PLATE
|
|
1000370034
|
REGULATOR
|
600 SERIES
|
REGULATOR,
PRESSURE; TYPE: DIRECT-ACTING GAS, INLET PRESSURE: 60 PSI, BODY MATERIAL:
CAST STEEL, CONNECTION 1 TYPE: FLANGE, CONNECTION 1 SIZE: 2 IN, STANDARD:
ASTM A216 WCB; MODEL:600 SERIES, MFR:DIVAL, DRAWING:
MD-451-5240-EG-ME-DIA-61602, POS:19; WITH OUTLET PRESSURE (NO: 2), SLAM-SHUT
PRESSURE (NO: 6)
|
DIVAL
|
|
1000369857
|
VALVE
|
9020
|
VALVE,
SOLENOID; VALVE SIZE: 1/4 IN, CONNECTION TYPE: NPT, ORIFICE SIZE: 11/32 IN,
POTENTIAL: 120 VAC, POWER: 4 W, ENCLOSURE RATING: NEMA 12; PN:9020, MFR:
ASCO; POS:14
|
ASCO
|
|
1000369929
|
VALVE
|
R412101827
|
VALVE,
SOLENOID; APPLICATION: DELACQUERING SYSTEM EMERGENCY VENT DAMPER;
PN:R412101827; DRAWING: MD-451-5240-EG-ME-GEA-61620, POS:2
|
VALVE
|
|
1000381360
|
REFRIGERANT
|
4940009
|
REFRIGERANT;
TYPE: R410A, STANDARD: CYLINDER,HFC RETROFIT; PN:04940009, SUPPL: ZAMIL COOL
CARE; TAG:8195-ACU-008A
|
REFRIGERANT
|
|
1000472364
|
MOTOR
|
MOTOR
|
MOTOR,
GEARED; FRAME: F3, RATIO: 1:120; MFR: Nam Kang Engineering; MANUFACTURING NO.
2012.6.27, FOR CRU COMMON CONVEYOR FUME BAG HOUSE 1
|
Nam Kang Engineering
|
|
1000013628
|
IMPELLER
|
HGS
|
IMPELLER,
PUMP; MATERIAL: TEFLON; PN:DPS18103711GE4, CFP25-200; EQ MODEL:HGS,
MER_ID:RM-U02-0026, FOR FLUID LEAK PROTECTION, DOMESTIC WATER RETURN UTILITY
PUMP
|
IMPELLER
|
|
1000027162
|
ANTENNA
|
DEA-2400-8-RICHTCPRH
|
ANTENNA;
TYPE: DIRECTIONAL; PN:DEA-2400-8-RICHTCPRH; MER_ID:RM-L01-0214
|
ANTENNA
|
|
1000465807
|
TRANSFORMER
|
TISJ11/1658-10
|
TRANSFORMER;
APPLICATION: CONTROL OF ASRS & SCALPER CRANES, TYPE: 66219-901,
POTENTIAL: PRIM: 480-600V 1.8A; SEC 1: 115V 4.4A; SEC 2: 115V 4.4A, APPARENT
POWER: 1000 VA, PHASE QUANTITY: 1, FREQUENCY: 60 HZ; PN:TISJ11/1658-10, MFR:
NORATEL
|
NORATEL
|
|
1000471659
|
ANTENNA
|
ANTENNA
|
ANTENNA;
TYPE: LAMBDA/4; WATER PROOF, FREQUENCY: 868,4 MHZ; MFR: JUMO; FIXED CABLE, LG
10 M, TMAX. 125 °C, FOR TCM STAND
|
JUMO
|
|
1000431380
|
GEARBOX
|
PM
120
|
GEARBOX;
TYPE: PLANETARY, RATIO: 51 : 1, SPEED: INPUT - 3000 U/MIN, POWER: OUTPUT
TORQUE - 300 NM, SHAFT DIAMETER: 32 MM, APPLICATION: FOR AGV; PN:PM 120, MFR:
IMSGEAR
|
IMSGEAR
|
|
1000470047
|
MOTOR
|
MOTOR
|
MOTOR,
GEARED; TYPE: CH-04PU PAM 63; MFR: CHIARAVALLI; OEM: TENOVA POMINI;
TAG:2210-RG-100, ROLL SHOP FILTRA DISK-450 MAGNETIC DISK SEPERATOR DRIVE
|
CHIARAVALLI
|
|
1000470113
|
ROTOR
|
ROTOR
|
ROTOR;
TYPE: THREE LOBES, APPLICATION: BLOWER MODE: SSR-200; MFR: TAIKO KIKAI;
TAG:3260-BL-108A/B, S/N:HIC3208, 90 KW, 1480 RPM, 58.8 KPA DP, 650 N/WKG
|
TAIKO KIKAI
|
|
1000370034
|
REGULATOR
|
600 SERIES
|
REGULATOR,
PRESSURE; TYPE: DIRECT-ACTING GAS, INLET PRESSURE: 60 PSI, BODY MATERIAL:
CAST STEEL, CONNECTION 1 TYPE: FLANGE, CONNECTION 1 SIZE: 2 IN, STANDARD:
ASTM A216 WCB; MODEL:600 SERIES, MFR:DIVAL, DRAWING:
MD-451-5240-EG-ME-DIA-61602, POS:19; WITH OUTLET PRESSURE (NO: 2), SLAM-SHUT
PRESSURE (NO: 6)
|
DIVAL
|
|
1000369857
|
VALVE
|
9020
|
VALVE,
SOLENOID; VALVE SIZE: 1/4 IN, CONNECTION TYPE: NPT, ORIFICE SIZE: 11/32 IN,
POTENTIAL: 120 VAC, POWER: 4 W, ENCLOSURE RATING: NEMA 12; PN:9020, MFR:
ASCO; POS:14
|
ASCO
|
|
1000369929
|
VALVE
|
R412101827
|
VALVE,
SOLENOID; APPLICATION: DELACQUERING SYSTEM EMERGENCY VENT DAMPER;
PN:R412101827; DRAWING: MD-451-5240-EG-ME-GEA-61620, POS:2
|
VALVE
|
|
1000469037
|
DIVIDER
|
43810
|
DIVIDER;
TYPE: VERTICAL; DRAG CHAIN CABLES, MATERIAL: POLYMER; PN:43810, OEM: IGUS;
USED FOR TCM DRAG CHAIN FOR EXIT COIL CAR AND PUP COIL MANIPULATOR, S -
SERIES
|
DIVIDER
|
|
1000466117
|
BATTERY
|
2 PzB 64
|
BATTERY;
APPLICATION: CCL PALLET LIFTER, POTENTIAL: 24 V, CURRENT CAPACITY: 64 AH;
PN:2 PzB 64, MFR: HAWKER ELECTRONICS
|
HAWKER ELECTRONICS
|
|
1000246307
|
HOSE
|
10096484
|
HOSE;
TYPE: SUCTION, LENGTH: 10 M; PN:10096484, MFR: SMS SEIMAG
|
SMS SEIMAG
|
|
1000014164
|
PACKING
|
XJ100SS-775-21266R-1000-36-3T6
|
PACKING;
TYPE: SERVICE; PN:PACT2011-NE007; EQ MODEL:XJ100SS-775-21266R-1000-36-3T6,
MFR:PRICE PUMP COMPANY, S/N:125933, FOR GEM WATER FEED PUMP
|
PRICE
PUMP COMPANY
|
|
1000254022
|
RING
|
RING
|
RING;
TYPE: SPLIT, INSIDE DIAMETER: 125, OUTSIDE DIAMETER: 190, WIDTH: 30,
MATERIAL: S355J2+N 1.0577, MATERIAL GRADE: S355J2+N 1.0577, APPLICATION: TCM
WORK ROLL OPERATOR SIDE, STANDARD: DIN EN 10025-2; DWG: 10243293
|
RING
|
|
1000254024
|
RING
|
RING
|
RING;
TYPE: SPLIT, INSIDE DIAMETER: 246 MM, OUTSIDE DIAMETER: 318 MM, WIDTH: 40 MM,
MATERIAL GRADE: S355J2+N 1.0577, APPLICATION: TCM WORK ROLL DRIVE SIDE,
STANDARD: DIN EN 10025-2; DWG: 10271313
|
RING
|
|
1000015950
|
TOOL KIT
|
SUPRA MILLING MACHINE 9 X 49
|
TOOL
KIT; TYPE: QUICK CHANGE; PN:M-7 CNC-01, CNC SUPRA 01; MER_ID:RM-M22-0001,
CONSISTS OF: MASTER HOLDER AND FOUR END MILL HOLDER, MIX OR MATCH; F/MILLING
MACHINE, 3 AXIS, CNC, MODEL: SUPRA MILLING MACHINE 9 X 49
|
TOOL
KIT
|
|
1000014111
|
SEAL
|
GISO100 X 65-200 ITT
|
SEAL,
MECHANICAL; PN:PACT2011-NE007; EQ MODEL:GISO100 X 65-200 ITT,
MER_ID:RM-U14-0028, FOR FILTER INLET PUMP; SERVICE PACKAGE
|
SEAL
|
|
1000014109
|
SEAL
|
CO500-306
ITT
|
SEAL,
RING; APPLICATION: RESIDUAL SLUDGE PUMP; EQ MODEL:CO500-306 ITT,
MER_ID:RM-U14-0026, SERVICE PACKAGE
|
SEAL
|
|
1000312218
|
WASHER
|
130428
|
WASHER,
THRUST; APPLICATION: NEEDLE THRUST BEARING, INSIDE DIAMETER: 0.625 IN,
OUTSIDE DIAMETER: 1.125 IN, THICKNESS: 0.060 IN; PN:130428, OEM: APPLETON;
DRAWING: 130410, POS:9, ASSY,AIK,HD
|
WASHER
|
|
1000311019
|
SPIDER
|
SPIDER
|
SPIDER;
TYPE: R; REF:B11712, MFR:ARCO LTD, DRAWING: 0006-DIBA, HCM DECHOCKER
|
ARCO
LTD
|
|
1000311673
|
TOOL
|
WINTER 402K
|
TOOL;
APPLICATION: GRINDING WHEEL DRESSER, MATERIAL: DIAMOND 1 KARAT, TYPE: SINGLE
POINT, STYLE: STRAIGHT SHANK, DIAMETER: 10 MM, LENGTH: 26 MM, STANDARD: DIN
228; PN:WINTER 402K, MFR: SAINT GOBAIN QUARTZ; MOUNTING TYPE MK0
|
SAINT GOBAIN QUARTZ
|
|
1000311671
|
TOOL
|
WINTER
400
|
TOOL;
APPLICATION: GRINDING WHEEL DRESSER, MATERIAL: DIAMOND 1 KARAT, TYPE: SINGLE
POINT, STYLE: TAPERED SHANK, DIAMETER: 12.065 MM, LENGTH: 49 MM, STANDARD:
DIN 228; PN:WINTER 400, MFR: SAINT GOBAIN QUARTZ; MACHINE MOUNTING TYPE MK1
|
SAINT GOBAIN QUARTZ
|
|
1000015050
|
MOUNT
|
6510 JEOL
|
MOUNT;
DIAMETER: 32 MM, HEIGHT: 10 MM, TYPE: SEM SPECIMEN; PN:7801 01286; EQ
MODEL:6510 JEOL, MER_ID:RM-M23-0003
|
MOUNT
|
|
1000459342
|
BATTERY
|
XL-205F-T1
|
BATTERY,
DRY CELL; TYPE: LITHIUM, POTENTIAL: 3.6 V, CURRENT CAPACITY: 19 AH,
DIMENSIONS: SIZE D, CONNECTION TYPE: WITH CONNECTOR; PN:TL-5920/F, MFR:
TADIRAN BATTERIES, PN:XL-205F-T1, MFR: XENOENERGY; MINIMUM RECOMMENDED
CONTINUOUS CURRENT 230MA
|
XENOENERGY
|
|
1000460625
|
BATTERY
|
TL-5920/F OR TL-5920/T
|
BATTERY,
DRY CELL; TYPE: LITHIUM, POTENTIAL: 3.6 V, CURRENT CAPACITY: 8.5 AH,
DIMENSIONS: SIZE C, CONNECTION TYPE: WITH TWO WIRES ATTACHED TO BATTERY;
PN:TL-5920/F OR TL-5920/T, MFR: TADIRAN BATTERIES; MINIMUM RECOMMENDED
CONTINUOUS CURRENT 230MA
|
TADIRAN BATTERIES
|
|
1000014068
|
MEMBRANE
|
8040
|
MEMBRANE;
PN:BW30-440i, MFR: FILMTEC; MODEL:96EA, EQ MODEL:8040, MFR:CJK ALLIANCE, FOR
RO UNIT, 8''A; ORG PART: FILMTEC
|
CJK
ALLIANCE
|
|
1000014064
|
O RING
|
96000
|
O
RING; MATERIAL: ETHYLENE PROPYLENE, APPLICATION: RO VESSEL HEAD; PN:96000,
MFR: PENTAIR; DRAWING: SPARES_LIST_80S_CODED, POS:7, TYPE: HEAD SEAL; FOR RO
UNIT
|
PENTAIR
|
|
1000014062
|
PORT
|
96162
|
PORT;
APPLICATION: MEMBRANE PRESSURE VESSEL, MATERIAL: ENGINEERING THERMOPLASTIC,
TYPE: EXT PERMEATE; PN:96162, MFR: PENTAIR; DRAWING: SPARES_LIST_80S_CODED,
POS:10, FOR RO VESSEL; MATERIAL : ENG THERMOPLASTIC; FOR RO UNIT
|
PENTAIR
|
|
1000014063
|
RING
|
47336
|
RING;
TYPE: SPIRAL, MATERIAL: SS, MATERIAL GRADE: STS316, APPLICATION: RO VESSEL;
PN:47336, MFR: PENTAIR; DRAWING: SPARES_LIST_80S_CODED, POS:4, FOR RO UNIT
|
PENTAIR
|
|
1000026981
|
ENCODER
|
CEV65M-PB
|
ENCODER;
APPLICATION: HOTMILL-PHF A EXTRACTOR, TYPE: ABSOLUTE, POTENTIAL: 11-27 VDC,
CURRENT: 350 MA; PN:CEV65M-PB, MFR: TR ELECTRONIC; S/N:00055, MFR:TR
ELECTRONIC, WITH SHAFT ANGLE, PROFIBUS USER ORGANIZATION; STEPS: 8192.000;
REVOLUTION : 4096.000; PINOUT: TR-ECE-TI-D-0017
|
TR
ELECTRONIC
|
|
1000436884
|
TRANSFORMER
|
TRANSFORMER
|
TRANSFORMER,
POWER; APPLICATION: WORKSHOP LATHE MACHINE, TYPE: DRY, APPARENT POWER: 500
VA, POTENTIAL: INPUT VOLTAGE : 110-220-380-440-480 VAC, 1 PH.;OUTPUT VOLTAGE
: 12-24-48-110-220 VAC, 1 PH. VAC, PHASE QUANTITY: SINGLE; MFR: INTACT
CONTROLS; IP-00, OPEN TYPE INSULATION CLASS F, NATURAL AIR COOLED, FREQ.
50/60HERTZ (1/SECOND)
|
INTACT CONTROLS
|
|
1000479089
|
RELAY
|
3RP1525-1BP30
|
RELAY,
TIME DELAY; APPLICATION: CRANES, ACTION: MULTI FUNCTION 2 CHANGE OVER;
PN:3RP1525-1BP30, MFR: SIEMENS
|
SIEMENS
|
|
1000026200
|
BUSH
|
40912 MECHATHERM
|
BUSH;
MATERIAL: DU; PN:40912-0017-21; MODEL:MB6070, EQ MODEL:40912 MECHATHERM,
MER_ID:RM-C02-0192
|
BUSH
|
|
1000014854
|
HOUSING
|
UHI-OGS-0
|
HOUSING;
TYPE: INDOOR, WIDTH: 81 MM, LENGTH: 89 MM, HEIGHT: 262 MM, MATERIAL: AL,
STANDARD: EN 60950-1; PN:KDA-CCTV-003, MFR: BOSCH GMBH, PN:UHI-OGS-0;
MER_ID:RM-E04-E05-E06-0022, WITH SUNSHIELD
|
BOSCH GMBH
|
|
1000026185
|
KIT
|
40912 MECHATHERM
|
KIT,
SEAL; PN:40912-0006-2-1; EQ MODEL:40912 MECHATHERM, MER_ID:RM-C02-0177,
F/PLOUGH TRAVEL CYLINDER, SIZE: DIA 125 X LG 4000 X THK 90 MM
|
KIT
|
|
1000026198
|
RING
|
40912
MECHATHERM
|
RING,
RETAINING; TYPE: EXTERNAL, DIMENSIONS: DIA 60 MM; PN:471-60;
PN:40912-0017-18; EQ MODEL:40912 MECHATHERM, MER_ID:RM-C02-0190
|
RING
|
