Deep groove ball bearing 6209-ZZ

New model: 6209-ZZ 

Deep groove ball bearing type introduction

Deep groove ball bearings generally consist of a pair of ferrules, a set of cages, and a set of steel balls. The utility model has the advantages of simple structure and convenient use, and is the most common and widely used type of bearing. This type of bearing is mainly used to withstand radial loads, but can also withstand a certain amount of axial load in either direction. When the radial oil gap of the bearing is increased within a certain range, the bearing has the property of an angular contact ball bearing and can withstand a large axial load. After the deep groove ball bearing is mounted on the shaft, the axial displacement of the shaft or casing can be limited to the axial extent of the bearing. At the same time, when the shell hole and the shaft (or the outer ring to the inner ring) are relatively inclined, (not more than 8ˊ-16ˊ, determined according to the play) can still work normally. Since there is a slope, it is necessary to reduce the service life of the bearing

Inner diameter(mm):45 

 Outer diameter(mm):85 

 width(mm):1

Friendly Reminder
You are welcome to visit our website chinesespare.com, wish you could find your interested products here. If there are some products you are interested in, but their information is not detailed, please contact us, we have a professional service team to serve you.

If you need other spare parts, we will be willing and do our best to serve you.