Electromagnetic flowmeter for TK1000 series TK1100 Standard Series-DN3

1．Normal Working Conditions Ambient Temperature：-30～+65℃;Relative Humidity：5%～ 90%；Power Supply： single phase AC power supply 85～ 265V， 45～ 63Hz；DC Power Supply18VDC～36VDC；Dissipation Power ：less than 15W,Output Pulse Width: user software settings; Output Electrical Isolation: photoelectric isolation, Isolation Voltage: >1000VDC; Pulse Output Driver: field effect transistor output, The Maximum withstand voltage is 36VDC, the maximum load current is 250mA.
Accuracy:0.5%,Installation method:Hold, Flange,Repeatability:0.1%,Measuring range:0-12m/s,Connecting flange:GB/T9119-2000 or any other choice,Pressure:4.0MPa,Lining material:PO,PTFE,PFA,Electrode material:316L,HC,HB, titanium, tantalum, platinum,Electrode form:Standard,(scraper,it can be replaced by DN>350),Protection level of sensor:IP65，IP67，IP68,Conductivity:＞ 5μS/cm（water＞ 20μS/cm）,Maximum temperature of medium:Integrated type≤ 90℃,split type≤ 160℃（rubber、PO ≤ 70℃）,Ambient maximum temperature:-30℃ ~+65℃,Converter installation mode:Integrated,split,Output signal:4-20mA current signal, frequency / pulse output,Power supply:(AC:85V~265V,DC:18V~36V),Communication:RS485/Modbus、HART、PROFIBUS

Friendly Reminder
You are welcome to visit our website chinesespare.com, wish you could find your interested products here. If there are some products you are interested in, but their information is not detailed, please contact us, we have a professional service team to serve you.

If you need other spare parts, we will be willing and do our best to serve you.